The Sonic Pad is a 3D Printing Pad based on Klipper. It is highly integrated with strong computing power. Beneath the large 7-inch touch control screen, the Klipper firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance, but with less trouble. The Creality Sonic Pad can connect to almost any FDM 3D Printer on the market via a USB cable. With the included configuration manual, it is easy to set things up. There are 22 Creality popular printers that have been preconfigured to Sonic Pad. Upgrade experience without any delay. Speed up printing but keep the quality. Creality Sonic Pad uses precision-oriented algorithms to command the motors for higher printing speed. The built-in input shaper function will mitigate oscillation during high-speed printing and smooth out ringing, thus keeping the model quality. Printing a benchi with a normal speed is complete in 1 hour and 45 minutes at 50 mm/s speed. When using the Sonic Pad, printing takes 52 minutes at a speed of 160mm/s. One Sonic Pad can control four printers at the same time, making it easy to control multiple printers with printer selection. The first printer must be connected to the USB. The Creality Sonic Pad supports G-Code model preview when slicing with the Creality Print, Ultimaker Cura, Pursa Slicer and Super Slicer. The Creality Sonic Pad supports user-defined programmable macros, with each macro combining a series of commands to a specific function for higher efficiency. Camera can be added for real-time monitoring and time-lapse filming. Have the freedom to operate the Sonic Pad by either the built in touch screen or remotely from the web UI when connected to LAN. The Sonic Pad OS can be upgraded online via OTA or offline via USB disk. Open Source is available for users to freely modify and customize the source code.
- Precise control with the built-in input shaper function to mitigate oscillation during high-speed printing and smooth out ringing
- Multi-printer connect as one Sonic Pad can control 4 printers at the same time
- Connect the USB camera to utilize time-lapse photography and AI detection
- Remote control
- Compatible Creality Printer models are: Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender-3 Pro, Ender-3 V2, Ender-3 Max, Ender-3 V2 Neo, Ender-3 Max Neo, Ender-5 S1, Ender-5 Pro, Ender-7, CR-6 SE, CR-6 Max, CR-10 Smart, CR-10 Smart Pro, CR-10 and Sermoon D1
- For convenience there are 4 USB ports, RJ45 and G-Sensor
- AI can detect a print quality problem and suspend printing
- Connect to DSLR camera for shooting function and time-lapse photography-support Cannon series cameras
- Connect USB keyboard and mouse for more convenient control
- Creality Sonic Pad can be operated either by the built-in touch screen or remotely from the web UI when connected to LAN
- Creality Sonic Pad supports user-defined programmable macros, with each macro combining a series of commends to a specific function for higher efficiency
- The laser engraving function is supported for both Ender-3 S1 and Ender-3 S1 Pro models
- Users are free to modify and customize the source code
- FAQ troubleshooting, real-time communication with online customer service
- In the event of a power outage, you can continue printing once power returns
- The system support OTA online upgrades
- Display resolution: 1024 x 600
- Has a speaker and Vibration sensor
